Connecting VAHS Pro

We normally ship each unit with all cables and adapters already connected

Add external Scalarwave Coil leads to Channel 2 Red and Black

Volume 1 controls the internal Scalarwave Coil and the LED Light Pad
Adjust Volume 1until LED's Discs flash when audio plays
Volume 2 controls the external Scalarwave Coil and the LED Light Pad
Adjust Volume 2 until LED's Discs flash when audio plays
The 4 LED's on the Disc should always flash whenever audio is playing
If you see either LED clipping light located to the right of the volume controls
staying on - lower the respective volume control

Rolls Amplifier instructions concerning the BURN WARNING!

It reads: THE FRONT PANAL OF THE RA235 IS THE HEAT DISTRIBUTION FOR THE OUTPUT STAGES. IF THE UNIT IS OPERATED AT HIGH VOLUMES FOR LONG PERIODS IT MAY GET HOT.

The amplifier should operate, warm to the touch. If the amplifier gets to hot to the touch then it is being Overdriven. If the front LED clipping lights stay on it is being overdriven. Turn the volume down. Turn The volume down on the CD player if necessary. DO NOT OVERHEAT THE AMPLIFIER OR YOU WILL BE DISTORTING THE AUDIO OUTPUT AND NOT ACHIVING THE PROPER RESULTS. YOU COULD ALSO BURN OUT THE INTERNAL SCALARCOIL AND EXTERNAL SPEAKER.