Channel 1 is already connected to Internal Scalarcoil and LED Disc
*Connect Channel 2 to External Audio Sound Tube - red to red, black to black

Y connector plugs into White/Red RCA Jacks - then connects to CD Player

Volume 1 controls Channel 1 output to the Internal Scalarcoil and LED Disc
Adjust Volume 1 output until the 4 LED's on the Disc flash whenever audio is played.
The 4 LED's on the Disc should always flash whenever audio is playing

Volume 2 controls Channel 2 output to the External Sound Tube
Adjust Volume 2 output to the External Sound Tube until the audio is at a comfortable listening level

If you overdrive the amplifier it will distort the output signal and overheat the coil

If you see either LED clipping light located to the right of the volume controls
flashing - lower the respective volume control

Rolls Amplifier instructions concerning the BURN WARNING!

It reads: THE FRONT PANAL OF THE RA235 IS THE HEAT DISTRIBUTION FOR THE OUTPUT STAGES. IF THE UNIT IS OPERATED AT HIGH VOLUMES, IT MAY GET HOT.

I would like to add the following statement:

The amplifier should operate, warm to the touch. If the amplifier gets to hot to the touch then it is being Overdriven. If the front LED clipping lights stay on it is being overdriven. Turn the volume down. Turn The volume down on the CD player if necessary. DO NOT OVERHEAT THE AMPLIFIER OR YOU WILL BE DISTORTING THE AUDIO OUTPUT AND NOT ACHIVING THE PROPER RESULTS. YOU COULD ALSO BURN OUT THE INTERNAL SCALARCOIL AND EXTERNAL SPEAKER.

We supply this Magnavox CD player for our US Customers

*CD Sound Machine – *"push” power cord firmly into back of CD Sound Machine *plug audio lead from Evolution coil into earphone jack in back of CD Sound Machine *Turn bass boost on. *Function control – Select CD *Turn audio control to half level *Insert Evolution CD (number of tracks will appear in display window) *Push Arrow/Pause button to left of display window to start playing the CD